Nissan Armada 2025-2026 Service and Repair Manual: Front Fillet Molding

Exploded View

Front fillet molding Rear fillet molding front Rear fillet molding rear Grommet Double-sided tape [t: 1.2 mm (0.047 in)] : Clip : Pawl : Vehicle front : Always replace after every disassembly ...

Removal and Installation

REMOVAL Remove front fillet molding fixing screws . Apply protective tape (A) on the part to protect it from damage. Disengage front fillet molding fixing pawl indicated by arrows as shown in the ...

Other materials:

Removal and Installation
REMOVAL Remove front grille. Refer to Removal and Installation. Disengage fixing pawl. : Pawl Disconnect harness connector to remove ambient sensor . INSTALLATION Install in the reverse order of removal. ...

Work Procedure
REPLACE DRIVER SEAT CONTROL UNIT Replace driver seat control unit. Refer to Removal and Installation. >> GO TO 2. Vehicle SPECIFICATION RECOGNITION Connect battery negative terminal. Power switch ON and wait for 30 seconds or more. NOTE: When the driver seat control unit receives a signal f ...

Sun visors
To reduce glare from the front, pull down the main Nissan Armada sun visor 1. To block sunlight from the side, detach the sun visor from the center mount and rotate it sideways 2. Extend or retract the Nissan Armada sun visor extension 3 as needed for additional coverage. CAUT ...