Disassembly and Assembly
Disassembly and AssemblyAdjustment
PREPARATION BEFORE ADJUSTING
NOTE:
For details, refer to the regulations in your own country.
Before performing aiming adjustment, check the following.
Adjust the tire pressure to the specification.
Fill with fuel, engine coolant, and each oil.
Maintain the unloaded vehicle condition. (Remove luggag ...
Front Disc Brake
Unit: mm (in)
Item Limit Brake pad Wear thickness 2.0 (0.079) Disc rotor Wear thickness 27.4 (1.079) Thickness variation (measured at 8 positions)* 0.006 (0.0002) Runout (with it attached to the vehicle) 0.035 (0.0014)
*To check if rotor imbalance, rotor runout or rotor deformation is o ...
Exploded View
Upper ball seat Steering knuckle Baffle Splash guard Wheel hub and bearing assembly Disc rotor Hub bolt Cotter pin Lower ball seat : Vehicle front : N·m (kg-m, in-lb) : N·m (kg-m, ft-lb) : Always replace after every disassembly. ...