Sensor Rotor
Removal and InstallationMIG Welding Method
(1) PLUG WELDING
MIG plug welding method is used to repair the spot welded portions.
Keep the upper panel and lower panel tightly together. Before welding, contact closely the points to be plug welded.
Observe the welding condition described in the Body Repair Manual.
(a) Welding condition (plug wel ...
Exploded View
Rear side spoiler Double-sided tape
[t: 2.5 mm (0.098 in)] : Clip : Always replace after every disassembly. ...
Diagnosis Procedure
CHECK SELF-DIAGNOSTIC RESULTS
With CONSULT
Perform self-diagnosis for “DIFFERENTIAL LOCK”.
Is any malfunction detected by self-diagnosis?
YES>>
Check the malfunctioning system. Refer to DTC Index.
NO>>
GO TO 2.
CHECK DIFFERENTIAL LOCK MODE SWITCH
Perform trouble diagnosis for diffe ...