Inspection
WARNING:
-
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
COMPONENT PART
Make sure that the mounting conditions (looseness, backlash) of each component and component conditions (wear, damage) are normal.
WHEEL HUB ASSEMBLY (BEARING-INTEGRATED TYPE)
Check the following items, and replace the part if necessary.
-
Move wheel hub and bearing assembly in the axial direction by hand. Check there is no looseness of wheel bearing.
Axial end play : Refer to Wheel Bearing. -
Rotate wheel hub and make sure there is no unusual noise or other irregular conditions. If there is any of irregular conditions, replace wheel hub and bearing assembly.
Other materials
Transfer Assembly
Exploded View
Transfer assembly
: N·m (kg-m, ft-lb)
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Li ...
Wind Deflector
Exploded View
Refer to Exploded View.
Removal and Installation
REMOVALFully open the glass lid.
Disengage wind deflector fixing points using a remover tool (A) from moonroof unit assembly.
Remove wind deflector.
INSTALLATIONInstall in the reverse order of removal. ...
Washer Tank
Exploded View
Washer tank assembly
Packing
Hoodledge assembly RH
Washer tank inlet
Washer tank cap
: N·m (kg-m, in-lb)
Removal and Installation
WARNING:
REMOVALCAUTION:
When washer tank assembly is removed, washer fluid may come out so prepare a container to rece ...