Special Service Tool
|
Tool number (TechMate No.) Tool name | Description | |
|---|---|---|
|
KV101207S0 ( — ) Unified fuel lock ring wrench |
|
Removing and installing fuel tank lock ring |
|
KV10119800 ( — ) Fuel tank lock ring wrench |
|
Removing and installing fuel tank rock ring a: 187 mm (7.36 in) |
Commercial Service Tools
| Tool name | Description | |
|---|---|---|
| Power tool |
|
Loosening bolts and nuts |
FUEL SYSTEM : Service Setting Parts
| Name | Description |
|---|---|
| Filler tube guide 17261 6RA0A | Fuel draw out |
Other materials
Second Seat Cushion Finisher
Disassembly and Assembly
CAUTION:
When disassemble, always use a remover tool that is made of plastic to prevent damage.OUTSIDE SEAT CUSHION FINISHER OUTERDisassemblyDisengage fixing pawls, and then remove reclining knob cap.
: Pawl
Disengage fixing portion using a remover tool (A) according ...
Additional Service When Replacing Around View Monitor Control Unit
Description
CAUTION:
When replacing the around view monitor control unit, always replace it with a new one. Around view monitor system does not operate properly in case of reuse of the around view monitor control unit from another vehicle.
When before writing the around view monitor control unit ...
Additional Service When Replacing Side Radar
Work Procedure
Always perform the side radar configuration after replacing the side radar.SIDE RADAR CONFIGURATION
Perform saving vehicle internal information according to "Replace ECU" in CONSULT Operation Manual.
>>
GO TO 2.
SIDE RADAR ALIGNMENT
Perform the side radar alignment with CONSUL ...