Nissan Armada 2025-2026 Service and Repair Manual: FUEL TANK : Inspection
INSPECTION AFTER INSTALLATION
Use the following procedure to check for fuel leakage.
Ignition switch “ON” (with engine stopped), and check connections for leakage by applying fuel pressure to fuel piping.
Start engine and rev it up and check there are no fuel leakage at the fuel system tube and hose connections.
FUEL TANK : Removal & Installation
WARNING:
REMOVAL
WARNING:
Be sure to read “General Precautions” when working on the fuel system. Refer to GENERAL PRECAUTION : Precautions.
Perform steps 1 to 7 of “REMOVAL” in “ FUEL LEVEL ...
Evap Canister
...
Other materials:
Diagnosis Procedure
CHECK DOOR LOCK ACTUATOR
Check door lock actuator (passenger side).
Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
REPLACE BCM
Replace BCM. Refer to Removal and Installation.
Confirm the operation after rep ...
Removal and Installation
WARNING:
REMOVAL
Remove air breather hose A from transfer assembly.
Remove clip A .
Remove clip B .
Remove A/T air breather hose. Refer to Removal and Installation.
Release clip C and remove air breather hose assembly from bracket.
Separate each component part.
INSTALLATION
Note the follo ...
Exploded View
Camshaft bracket (No. 1) (bank 1) Camshaft (EXH) (bank 1) Camshaft (INT) (bank 1) Camshaft bracket Dowel pin Plug Gasket Camshaft signal plate (EXH) Camshaft signal plate (INT) Cylinder head (bank 1) Exhaust camshaft sprocket (bank 1) Intake camshaft sprocket (bank 1) Intake camshaft s ...
0.0055