| Applied model | Axle | 4WD | |
|---|---|---|---|
| Engine | VR35DDTT | ||
| Transmission | A/T | ||
| Rear final drive | R240 without differential lock | ||
| Propeller shaft model | 2S C-C | ||
| Number of joints | 2 | ||
| Joint type | 1st joint | Universal (Solid type) | |
| 2nd joint | Universal (Solid type) | ||
| Coupling method | Transfer side | Sleeve type | |
| Rear final drive side | Flange type | ||
| Shaft length (Spider to spider) | 1069.0 mm (42.09 in) | ||
| Shaft outer diameter | 114.3 mm (4.50 in) | ||
Propeller Shaft TubeAdjustment
WARNING:
Recommended fluid and fluid capacity : Refer to Fluids and Lubricants.
CAUTION:
Use only recommended A/T fluid. Never mix with other A/T fluid.
Always maintain the A/T fluid temperature within between 45°C (113°F) and 55°C (131°F) while checking with CONSULT when the A/T fluid level ...
Removal and Installation
REMOVAL
Remove instrument lower panel LH. Refer to Removal and Installation.
Remove steering column control module bracket mounting screw .
Disconnect steering column control module connector.
Remove steering column control module.
INSTALLATION
Note the following items, and then install in the rev ...
Removal and Installation
REMOVAL
Remove outside seat cushion finisher outer. Refer to Disassembly and Assembly.
Disengage massage switch harness fixing clip.
: Clip
Remove fixing screws and then remove massage switch.
INSTALLATION
Install in the reverse order of removal. ...