NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada owner manuals, service procedures, maintenance references, technical information and practical guides for different Armada generations.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Glass Mirror Position Cannot Be Adjusted

Nissan Armada 2025-2026 Service and Repair Manual / Driver Controls / Mirrors / Glass Mirror Position Cannot Be Adjusted

With Automatic Drive Positioner

Diagnosis Procedure

CHECK DOOR MIRROR MECHANISM

Check the following items.

  • Damage, deformation and foreign matter pinching of the door mirror mechanism.

  • Damage of harness due to rubbing and pinching.

  • Interference with other components.

  • Installed incorrectly.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace the malfunctioning parts.

CHECK POWER WINDOW MAIN SWITCH POWER SUPPLY AND GROUND CIRCUIT

Check power window main switch power supply and ground circuit. Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace the malfunctioning parts.

CHECK MIRROR MOTOR CIRCUIT

Check mirror motor circuit.

  • Door mirror (driver side): Refer to Component Function Check.

  • Door mirror (passenger side): Refer to Component Function Check.

Is the inspection result normal?

YES>>

Check intermittent incident. Refer to Intermittent Incident.

NO>>

Repair or replace the malfunctioning parts.

Without Automatic Drive Positioner

Diagnosis Procedure

CHECK DOOR MIRROR MECHANISM

Check the following items.

  • Damage, deformation and foreign matter pinching of the door mirror mechanism.

  • Damage of harness due to rubbing and pinching.

  • Interference with other components.

  • Installed incorrectly.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace the malfunctioning parts.

CHECK POWER WINDOW MAIN SWITCH POWER SUPPLY AND GROUND CIRCUIT

Check power window main switch power supply and ground circuit. Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace the malfunctioning parts.

CHECK MIRROR MOTOR CIRCUIT

Check mirror motor circuit. Refer to Component Function Check.

Is the inspection result normal?

YES>>

Check intermittent incident. Refer to Intermittent Incident.

NO>>

Repair or replace the malfunctioning parts.

    Other materials

    Differential Lock Indicator Lamp Does Not Turn on
    Description Differential lock indicator lamp does not turn ON when turning differential lock mode switch to “ON” after engine start. Diagnosis Procedure CHECK SELF-DIAGNOSTIC RESULTS With CONSULT Perform self-diagnosis for “DIFFERENTIAL LOCK”. Is any DTC detected by self-diagnosis? YES>&g ...

    Writing of Calibration Data
    Work Procedure DESCRIPTIONIf only the around view monitor control unit is replaced, the calibration data stored in the camera can be written to the around view monitor control unit by selecting "Camera Calibration" of "Work Support" mode in CONSULT.WORK PROCEDUREWRITE CALIBRATION DATA With CONSULT ...

    Additional Service When Replacing Side Radar
    Work Procedure Always perform the side radar configuration after replacing the side radar.SIDE RADAR CONFIGURATION Perform saving vehicle internal information according to "Replace ECU" in CONSULT Operation Manual. >> GO TO 2. SIDE RADAR ALIGNMENT Perform the side radar alignment with CONSUL ...