Removal and Installation
REMOVAL
Place glass mirror upward.
Apply protective tapes (A) on the part to protect it from damage.
Insert remover tool (A) into the recess at between glass mirror and door mirror actuator, and then disengage glass mirror fixing pawls.
CAUTION:
Disengage the fixing pawls slowly so they are not damaged.
 |
: Pawl |
Disconnect BSW harness connector 
.
Disconnect auto anti-dazzling harness connector (if equipped).
Disconnect door mirror heater harness connectors (if equipped).
Remove glass mirror.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, visually check that fixing pawls are securely engaged.
Other materials
Basic information
WARNING
Failure to properly follow the safety guidelines and operating instructions
for the Nissan Armada Intelligent Blind Spot Intervention (I-BSI) system may result
in serious injury or even fatal accidents.
The Nissan Armada I-BSI system is designed as a driver assistance feature
and ...
Front Under Cover
Exploded View
Off Road Models
Front under cover
Splash guard RH
Splash guard LH
N·m (kg-m, in-lb)
N·m (kg-m, ft-lb)
, : Indicates that the part is connected at points with same symbol in actual vehicle.
City Models
Front under cover
Splash guard RH
Splash guard LH
N· ...
Front Fog Lamp Aiming Adjustment
Adjustment
PREPARATION BEFORE ADJUSTINGNOTE:
For details, refer to the regulations in your own country.Before performing aiming adjustment, check the following.
Adjust the tire pressure to the specification.
Fill with fuel, engine coolant, and each oil.
Maintain the unloaded vehicle condition. ...