WARNING:
Never adjust properly the brightness and position of the displayed Head Up Display (HUD) image may interfere with the drivers ability to see through the windshield glass which could cause an accident leading to severe injury or death.
Never use the HUD for extended periods of time as that can cause you to not see other vehicles, pedestrians or objects, which could cause an accident leading to severe injury or death.
NOTE:
Do not place any type of liquid on or near the projector. Doing so may cause malfunction of the equipment.
Do not touch any internal parts of the projector. Doing so may cause malfunction of the equipment.
To prevent scratches to the projector glass, do not place any sharp objects on or near the projector opening.
Do not place any objects on the instrument panel which may obstruct the HUD display.
Emergency information may display even if the HUD is turned off.
The HUD has a built-in illuminance sensor
that controls the brightness of the displayed image. If the illuminance sensor is blocked with an object, the display darkens, making it difficult to see.

Exploded View
Engine assembly Alternator “B” terminal harness Alternator harness connector : Vehicle front : N·m (kg-m, ft-lb) , , , : Indicates that the part is connected at points with same symbol in actual vehicle. ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
SRT Set Driving Pattern
CAUTION:
Always drive the vehicle in safe manner according to traffic conditions and obey all traffic laws.
*1: Depress the accelerator pedal until vehicle speed is 90 km/h (56 MPH), then release the accelerator pedal and keep it released for more than 10 seconds. Depress the accelerator pedal until ...