Diagnosis Procedure
CHECK HEAD UP DISPLAY POSITION ADJUSTMENT SIGNAL
With CONSULT
-
Select "Data Monitor" mode of "Head Up Display” using CONSULT.
-
Check "Display up and down status" and "Display rotation status" indication as per the following condition.
Monitor item Condition Indication Display up and down status Press each position adjustment on the combination meter setting screen. The display changes to (-10) - (10) Display rotation status The display changes to (-10) - (10) Refer to Switch Name and Function.
Is the inspection result normal?
YES>>Replace Head Up Display unit. Refer to Removal and Installation.
NO>>Check Combination meter self diagnosis result. Refer to DTC Index.
Other materials
Intelligent Around View Monitor system limitations
Basic information
WARNING
The Nissan Armada Intelligent Around View Monitor has inherent limitations.
Ignoring these limitations while operating the vehicle may result in serious injury
or even fatal accidents.
Do not operate the Nissan Armada Intelligent Around View Monitor if the
outs ...
Water Hose
Exploded View
A/T assembly
Hose clamp
A/T water hose A
A/T water hose B
Clip A
Clip B
To water pipe. Refer to Exploded View.
To oil cooling exchanger. Refer to Exploded View.
: Always replace after every disassembly.
Removal and Installation
WARNING:
Jacking up or ...
Additional Service When Replacing Intelligent Key Unit
Description
CAUTION:
When replacing the Intelligent Key unit, always replace it with a new one. The functions controlled by the Intelligent Key unit does not operate properly in case of reuse of the Intelligent Key unit from another vehicle.Perform the following operations when replacing Intelligent ...