Sealant or/and LubricantWork Procedure
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the display unit. For details the operation, refer to "CONSULT Operation Manual".
Work Procedure [Display Unit]
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specificat ...
Work Procedure
Work Procedure (Before Replacing ECM)
NOTE:
After replacing with a blank ECM, programming is required to write ECM information. Be sure tofollow the procedure to perform the programming. According to the procedure of “Programming” in CONSULT Operation Manual.
SAVE ECM DATA
With CONSULT
Ignition ...
Inspection
CRANKSHAFT END PLAY
Measure the clearance between thrust bearings and crankshaft arm when crankshaft is moved fully forward or backward with a dial indicator.
Standard and limit : Refer to CylinderBlock.
If the measured value exceeds the limit, replace thrust bearings, and measure again. If it s ...