NOTE:
Diagnosis ProcedureRemoval and Installation
REMOVAL
Place glass mirror upward.
Apply protective tapes (A) on the part to protect it from damage.
Insert remover tool (A) into the recess at between glass mirror and door mirror actuator, and then disengage glass mirror fixing pawls.
CAUTION:
Disengage the fixing pawls slowly so they are not ...
Steering Gear and Linkage
Item Standard
: Gear housing end
: Inner socket end Rack stroke neutral position (C) 27.5 mm (1.083 in) Rack stroke full stroke position (C) 154 mm (6.06 in) Outer socket ball joint Swing force* (Spring balance measurement) 14.0 – 40.6 N (1.43 – 4.14 kgf, 3.15 – 9.12 lbf) Ball joint ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...