Chevrolet Sonic manuals

Nissan Armada 2025-2026 Service and Repair Manual: How to Use Hammer and Dolly

(1) HAMMER-ON-DOLLY

This is also known as dinging on the dolly. The dolly is held directly under the area being struck with the hammer. Hammering smoothes the dented metal between the dolly and hammer. This method causes the sheet metal to stretch.

Hammering on a dolly is most effective for repairing shallow dents.

(a) The hammer strikes the sheet metal, causing the dolly to bounce against the metal surface. Thus the damaged portion is worked out from both inside and outside.

(b) The sheet metal stretches between the hammer and dolly, and deformation is distributed around the strike area.

(c) Continuously move the dolly under the shifting deformation so that it can be struck properly.

(d) The sheet metal gradually stretches and returns to its original shape.

(2) HAMMER-OFF-DOLLY

This is also known as dinging off the dolly.

Place the dolly directly under a dent, and hammer against the edge of the dent. The hammer drives one area downward while the reaction of the dolly drives the adjacent area upward.

An example of the hammer-off-dolly operation is given below.

(a) Place the dolly under the deepest dent, and hammer the highest portion of the top surface.

(b) The raised portion of the surface lowers as it is struck with the hammer.

(c) Hammer blows are transmitted to the dolly, creating a reaction force.

(d) This reaction force pushes the dent.

(e) Repeat steps (a) - (d) until the surface is smooth.

Dollies
Dollies are used in combination with a hammer. They are a 1 kg - 2 kg (2 lb - 4 lb) steel blocks, heavier than a hammer, with various curves and planes. (1) USE OF DOLLIES (a) Place the dolly on the u ...

Spoons
Spoons are made of steel, and one or both ends are flat. Spoons are used as dollies in narrow spaces or as pry bars. (1) TYPES AND FEATURES OF SPOONS General purpose spoon This spoon has a gently c ...

Other materials:

Removal and Installation
REMOVAL Rear Door Sash Cover Front Remove rear door outside molding. Refer to Removal and Installation. Remove rear door glass run of upper side. Refer to Removal and Installation. Remove rear door weather-strip of upper side. Refer to Removal and Installation. Apply protective tape (A) on the part ...

Engine Oils
Prolonged and repeated contact with used engine oil may cause skin cancer. Try to avoid direct skin contact with used oil. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible. HEALTH PROTECTION PRECAUTIONS Avoid prolonged and repeated contact with oils, particular ...

Roof rack
Example Basic information WARNING In the Nissan Armada, always install the crossbars onto the roof side rails before placing any cargo. Loading items directly onto the roof rails or roof surface may result in vehicle damage. Ensure that Nissan Armada roof rack crossbars are mounted ...

© 2014-2026 Copyright www.niarmada.com
 
0.0057