Nissan Armada 2025-2026 Service and Repair Manual: Service Information
- Sheet Metal Work
- Sheet Metal Work Tools
- Hammers
- Dollies
- How to Use Hammer and Dolly
- Spoons
- Scribing Chisels
- Types and Uses of Tinman Shears
- Tools for Pulling
- Shrinking the Sheet Metal
- Shrinking Methods
- How to Heat Sheet Metal
- Correcting a Deformed Exterior Body Panel
- Determining Panel Damage
- Basic Types of Damage
- Examination of Panel Damage
- Elastic VS. Plastic Deformation
- Basic Repair Procedure
- Paintless Dent Repair
- Confirmation of The Panel
- Light Stand
- Selection of Repair Tools
- Panel Repair Methods
- Polishing of Panel Surface and Anti-corrosive Treatment
- Examination of Panel
- Glue System
- Plastic Repair
- Body Welding and Precautions
- Outline of Welding
- Features of Welding
- Safety Section
- Welding of Automobile Body
- Electric Resistance Spot Welding
- Principles of Spot Welding
- Features of Spot Welding
- Construction of Spot Welder
- Cooling Methods
- Spot Welding Gun
- Mult-functional Type Spot Welder
- Process of Spot Welding
- Condition of the Panel
- Precautions when Performing Spot Welding
- Inspection of Welded Portion
- Mag Welding
- Principles of MAG Welding
- Features of MAG Welding
- Structure of MAG Welding Machine
- Condition of Panel to be Welded
- Inspection of Welded Portions
- Types of MAG Welding
- Safety and Health
- Precautions for Operation
- Protectors
- Safety Section
- Safety Stand
- Inflammables
- Working Environment
- Handling of Welding Equipment
- Working with Body Straightening Equipment
- Use of Protectors
- Precautions while Working
- Protection of Vehicle
- Working with Grinding the Body Filler (putty)
- Danger from Dust
- Precautions during Dust Generating Work
- Protector and Equipment
- Precautions during Air Blow
- Paint Safety Precautions
- Repairing Procedures and Precautions
- Fundamentals of Body Repair
- Damage Diagnosis
- Damage Diagnosis: Fundamental
- What is Energy
- Deformations on Panels
- Deformation on Objects of Forms
- Distortions on Structures
- Damage Analysis Procedure
- Damage Diagnosis
- Determining Various Conditions of the Collision
- External Appearance
- Key Points in Choosing Repair Methods
- Parts to be Replaced
- Checking Damage
- Tracking Gauge and Steel Tape
- Three-dimensional Measuring Equipment
- Body Straightening Equipment
- Comparison of Pulling Methods
- Clamps
- Hooks and Other Tools
- High Intensity Cabin Structure
- Repair Techniques Using Body Straightening Equipment
- Steps and Process
- Securing the Vehicle
- Securing and Pulling
- Repair Procedure for Pulling
- Repair Sequence
- Key Points in Actual Repair Work
- Replacement of Panel
- Door Hemming
- Adjustment Fitting of Front Fender
- Adjustment Fitting of Door Assembly
- Partial Replacement of Panel (welded Panel)
- Welded Panel Replacement Procedure
- Rough Cutting of Panel
- Cutting Off Welded Portions
- Precautions for High Strength Steel (HSS) and Ultra High Strength Steel (UHSS)
- Prohibition for Ultra High Strength Steel (UHSS)
- Rear Fender Hemming Process
- Welding Method for Stud Bolt and Nut
- Preparation for Service Panel Installation
- Anti-corrosive Treatment
- Use of Body Filler (putty) and Grinding
- Types of Filler and Putty
- Procedure for Applying Body Filler
- Drying the Body Filler
- Grinding the Filled Area
- Sandpaper Grits
- Grinding Power of Air Sander
- Repair of Rust and Corrosion
- Removal of Rust Limited to the Skin Panel Surface
- Repair of Corroded Panel
- Frame Repair
- General Information
- Checking Damage
- Repair by Heating
- Frame Securing Method
- Safety and Health
- Elimination of Residual Stress
- Repairable Frame Damages
- Frame Vehicle Construction
- Frame Repair Procedure
- Frame Deformation
- Sagging
- Side-sway
- Twisting
- Diamond
- Buckling
- Frame Deformation Measuring Method
- Measurement with Manual Gauges
- Measurement with Three-dimensional Measuring Equipment
- Frame Securing
- Anchoring by Rigid Racks and Chains
- Anchoring with Frame Attachments
- Frame Straightening Work
- Frame Repair Method according to Deformation Type
- Precautions for Frame Repair
- Cut and Butt Joint Weld
- Conclusion
- Aluminum Repair
- Sheet Metal Work (aluminum)
- Sanding
- Hammering
- Heating Repair
- Shrinking
- Precautions during Assembly
- Welding (aluminum)
- Comparision of Chemical and Physical Properties between Aluminum and Iron
- Filler Metal
- TIG Welding
- MIG Welding
- MIG Welding Method
- Precautions during Welding
- Body Straightening (aluminum)
- Securing the Vehicle
- Frame Straightening
- Paint
- Scratch Shield
- Types of Clear Coat and Their Characteristics (Existing Model)
- Principle
- Precautions for Repair Coating
Sheet Metal Work
...
Other materials:
Work Procedure
When the following parts are replaced or removed, be sure to perform the specified incidental work in order to operate the system normally.
PREPARATION BEFORE CALIBRATION
Place the vehicle on a level surface.
Adjust all tire pressures to the specified pressure. Refer to TIRE AIR PRESSURE : Service D ...
Removal and Installation
CAUTION:
Never damage the body panel.
REMOVAL
CAUTION:
Remove luggage rear plate. Refer to Removal and Installation.
Release luggage side lower finisher portion of back door weather-strip. Refer to Removal and Installation.
Set second seat to walk-in position.
Remove third seat. Refer to Removal and ...
Symptom Table
Symptom Confirmation item Reference page AEB system display does not display Combination meter On Board Diagnosis Function AEB OFF warning lamp is blinking The distance sensor area of the front of the vehicle is covered with dirt or is obstructed
The interior temperature of the vehicle is ext ...
© 2014-2026 Copyright www.niarmada.com
0.0094
0.0094