Exploded View
 |
Transfer assembly |  |
Input oil seal | ||
 |
: vehicle front | ||||
 |
: Always replace after every disassembly. | ||||
 |
: Apply transfer fluid. | ||||
Removal and Installation
WARNING:
-
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
REMOVAL
Remove transfer assembly from vehicle. Refer to Removal and Installation.
Remove input oil seal.
CAUTION:
Never damage the front case and input shaft.
INSTALLATION
Note the following, and install in the reverse order of removal.
-
Install input oil seal with a drift (A) (commercial service tool) within the dimension (L) shown as follows.
L : 1.5 – 2.5 mm (0.059 – 0.098 in) 
CAUTION:
-
Never reuse input oil seal.
-
Apply transfer fluid onto circumference of oil seal.
-
When installing, never incline input oil seal.
-
Never handle the oil seal inner periphery and oil seal lip.
-
Other materials
Basic information
When towing a Nissan Armada, it is essential to comply with all applicable local
and regional regulations. Using incorrect towing methods or equipment can lead to
serious vehicle damage.
For safe and proper towing, it is highly recommended that a professional towing
service handle the Nissan ...
Basic information
The engine cooling system of the Nissan Armada is factory-filled with a precisely
balanced mixture consisting of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue)
and 50% water. This formulation ensures reliable year-round protection against freezing,
overheating, and corrosion.
This adv ...
Charge Air Cooler
Exploded View
Air inlet tube 1
Bracket 1
Mounting rubber (upper)
Bracket 2
Charge air cooler cover
Clip
Mounting rubber (lower)
Bracket 3
Bracket 4
Air inlet tube 2
Air inlet hose
Clamp
Recirculation valve
Turbocharger boost sensor
Charge air cooler
...