INSPECTION AFTER INSTALLATION
Check fluid leakage and the fluid level. Refer to Inspection.
Removal and Installation
Input Oil SealRemoval & Installation
REMOVAL
Remove the luggage side lower finisher. Refer to Removal and Installation.
Remove rear pillar speaker mounting screws , and then remove rear pillar speaker .
Remove bracket mounting bolts , and then remove bracket .
INSTALLATION
Installation is the reverse order of removal. ...
Removal and Installation
REMOVAL
Remove front grille. Refer to Removal and Installation.
Disengage fixing pawl.
: Pawl
Disconnect harness connector to remove ambient sensor .
INSTALLATION
Install in the reverse order of removal. ...
Work Procedure
REPLACE INTELLIGENT KEY UNIT
Replace Intelligent Key unit. Refer to Removal and Installation.
>>
GO TO 2.
WRITING Vehicle SPECIFICATION
CONSULT Configuration
Perform configuration. Refer to Description.
>>
GO TO 3.
REGISTER INTELLIGENT KEYS
CAUTION:
If perform Intelligent Key registr ...