Nissan Armada 2025-2026 Service and Repair Manual: Inspection
INSPECTION AFTER REMOVAL
Appearance
Propeller Shaft Runout
Check propeller shaft runout at several points with a dial indicator. If runout exceeds specifications, replace propeller shaft assembly.
| Propeller shaft runout | : Refer to Propeller Shaft Tube. |
Propeller shaft runout measuring point (Point “
”).
: Front side Dimension A : 80 – 100 mm (3.15 – 3.94 in) B : 100 – 120 mm (3.94 – 4.72 in) C : 268.5 mm (10.57 in)
Journal Axial Play
As shown in the figure, while fixing yoke on one side, check axial play of joint. If the journal axial play exceeds the specification, repair or replace the journal parts.
| Journal axial play | : Refer to Journal. |
Joint Flex Torque
Check that the journal moves smoothly and is below the joint flex torque specification. If the joint flex torque exceeds the specification, repair or replace the journal parts.
| Joint flex torque | : Refer to Journal. |
INSPECTION AFTER INSTALLATION
After assembly, perform a driving test to check propeller shaft vibration. If vibration occurred, separate propeller shaft from final drive. Reinstall companion flange by changing the phase between companion flange and propeller shaft by the one bolt hole at a time. Then perform driving test and check propeller shaft vibration again at each point.
Disassembly and Assembly
DISASSEMBLY
Put a matching mark between propeller shaft and flange yoke and remove snap rings .
CAUTION:
For matching mark, use paint. Never damage the surface.
Lightly tap bottom of yoke using a c ...
Other materials:
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Removal and Installation
REMOVAL
Remove cover. Refer to Removal and Installation.
Disconnect light & rain sensor harness connector.
Disengage light & rain sensor fixing pawls, and then peel off light & rain sensor.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
...
Roof rack
Example
Basic information
WARNING
In the Nissan Armada, always install the crossbars onto the roof side
rails before placing any cargo. Loading items directly onto the roof rails or
roof surface may result in vehicle damage.
Ensure that Nissan Armada roof rack crossbars are mounted ...
0.0072