INSPECTION AFTER INSTALLATION
Perform the self-diagnosis using CONSULT. Check if any DTC is detected. Refer to CONSULT Function.
Confirm to close the hood.
Always check for the air leakage with soapy water.
Removal and Installation
AdjustmentInspection
WARNING:
Inspect fuel lines, fuel filler cap and fuel tank for improper attachment, leakage, cracks, damage, loose connections, chafing or deterioration.
: Engine : Fuel line : Fuel tank
If necessary, repair or replace damaged parts.
...
Twisting
This refers to deformation of side frame-to-crossmember joints due to rollover caused by a collision accident. The right and left frames/members are twisted in the axially opposite direction to each other. In the body alignment dimensions, the height values of the side frame measurement points locat ...
Removal and Installation
WARNING:
REMOVAL
Remove the following parts:
Front under cover using a power tool (commercial service tool). Refer to Removal and Installation.
Drive belt: Refer to Removal & Installation.
Crankshaft pulley: Refer to Removal & Installation.
Remove front oil seal using a suitable tool.
CA ...