INSPECTION BEFORE REMOVAL
Check brake fluid level switch. Refer to Brake Fluid Level Switch.
INSPECTION AFTER REMOVAL
Check the following items, and replace the part if necessary.
Check for damage, deformation, interference with the other parts, and looseness of connection.
Check for fluid leakage from connection. Refer to Inspection.
CAUTION:
When fluid leakage is occurred, tighten each bolt to the specified torque. Replace parts if there is still leakage.
Check the input rod length (A). If the length of the input rod is outside the standard value, replace the electrical brake control unit.

Input rod length (A): Refer to Electrical Brake Control Unit.
INSPECTION AFTER INSTALLATION
If replacing electrical brake control unit, perform "ADDITIONAL SERVICE WHEN REPLACING ELECTRICAL BRAKE CONTROL UNIT". Refer to Work Procedure.
Perform stroke sensor calibration when electrical brake control unit removed and installed, or replaced. Refer to Work Procedure.
Removal & Installation
DisposalExploded View
Without ProPILOT ASSIST 2.1
Battery fix frame Battery cover Negative cable Battery current sensor 12V battery Battery fix rod Battery fix rod clip Battery tray Battery positive terminal Battery positive terminal cover Battery terminal with fusible link Positive cable : N·m (kg-m, in-l ...
HomeLink Universal Transceiver
Basic information
The HomeLink Universal Transceiver in the Nissan Armada offers a practical and
streamlined solution by combining the functions of up to three separate handheld
remote controls into one integrated system.
With the Nissan Armada HomeLink system, you can conveniently operate a w ...
How to enable/disable the systems
Vehicle information display
Steering-wheel-mounted controls (right side)
Basic information
In the Nissan Armada, a wide range of Driver Assistance systems can be easily
customized through the vehicle information display. Using the steering-wheel-mounted
controls, the driver can navi ...