After opening and closing the back door, check that door is fixed to the vehicle body normally.
Check the lock/unlock operation of back door lock.
Check the back door lock lubrication condition. If necessary, apply body grease to back door lock.

![]() | : Body grease |
Removal and Installation
Unlock proceduresDoor Does Not Lock/unlock and Engine Does Not Start (req Sw/push Sw) (all Keys)
All doors do not lock/unlock using door request switch, and engine does not start when push-button ignition switch is pressed while carrying Intelligent Key.
SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS)
Door lock operation (remote keyless entry) Door lock operation (one touch senso ...
Diagnosis Procedure
NOTE:
Check that refrigerant is enclosed in cooler cycle normally. If refrigerant amount is shortage from proper amount, perform the inspection of refrigerant leakage.
CHECK MAGNET CLUTCH OPERATION
Check magnet clutch. Refer to Diagnosis Procedure.
Does it operate normally?
YES>>
GO TO 2.
NO ...
Removal and Installation
WARNING:
REMOVAL
Shift the transmission to the neutral position, and then release the parking brake.
Put matching mark on rear propeller shaft flange yoke and transmission companion flange.
CAUTION:
For matching mark, use paint. Never damage propeller shaft flange and transmission companion flang ...