WARNING:
INSPECTION

| Wear thickness | : Refer to Rear Disc Brake. |
ADJUSTMENT
CAUTION:
Drive vehicle on straight, flat road.
Drive without depressing brake for a few minutes to cool the brake.
Repeat steps 1 to 3 until pad and disc rotor are securely fitted.
Brake Pad
Disc RotorRemoval and Installation
CAUTION:
REMOVAL
Disengage license plate lamp fixing pawl according to numerical order 1→2 indicated by arrows as shown in the figure.
Disconnect license plate lamp harness connector, and then remove license plate lamp.
INSTALLATION
Connect license plate lamp harness connector.
Install license p ...
Removal and Installation
WARNING:
CAUTION:
Front bumper fascia assembly is made of resin. Never apply excessive force to it, and be careful to prevent contact with oil.
REMOVAL
Remove front grille. Refer to Removal and Installation.
Remove front bumper energy absorber A.
Disengage active grille shutter fixing clips .
Di ...
FUEL PUMP CONTROL MODULE (FPCM) : Removal & Installation
REMOVAL
Remove the luggage side finisher LH. Refer to Exploded View.
Disconnect fuel pump control module (FPCM) harness connector and remove the FPCM from the vehicle.
Remove bracket from fuel pump control module (FPCM).
INSTALLATION
Install in the reverse order of removal.
Install bracket to fuel ...