Special Service Tools
The actual shapes of TechMate tools may differ from those of special service tools illustrated here.
|
Tool number (TechMate No.) Tool name | Description | |
|---|---|---|
|
(NI-39570) Chassis ear |
|
Locates the noise |
|
(NI-50397) NISSAN Squeak and Rattle Kit |
|
Repairs the cause of noise |
Commercial Service Tools
| Tool name | Description | |
|---|---|---|
| Engine ear |
|
Locates the noise |
| Power tool |
|
Loosening bolts, nuts, and screws |
| Remover tool |
|
Removes clips, pawls, and metal clips |
Other materials
Intelligent Rear View Mirror System Does Not Operate
Diagnosis Procedure
INTELLIGENT REAR VIEW MIRROR FUNCTIONAL INSPECTION
Ignition switch ON.
Check the intelligent rear view mirror system is operating normally after setting power supply lever of intelligent rear view mirror lower part to ON.
Is the inspection result normal?
YES>>
GO TO ...
Diagnosis and Repair Workflow
Nissanconnect
Work Flow
OVERALL SEQUENCEDETAILED FLOWINTERVIEW FOR MALFUNCTION
It is also important to clarify the customer concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.
NOTE:
The customers are not professionals. Neve ...
Calibrating Camera Image (around View Monitor)
3d Fixed View
Work Procedure
Calibration must be performed after removing/replacing the cameras, removing parts (e.g. front grille, door mirror, and others) mounted on the cameras, or replacing the around view monitor control unit.
The use of CONSULT is required to perform calibration or writin ...