When performing jump start, do not supply power from the 12V sub battery (lithium ion battery).
Do not supply power from the 12V sub battery (lithium ion battery) to external devices.
Do not disassemble the 12V sub battery (lithium ion battery).
Do not hit with hammer or trample the 12V sub battery (lithium ion battery).
Do not remove air bleeding tube from the 12V sub battery (lithium ion battery).
Determining Panel Damage
CAUTION:
This repair method should not be used on rails and reinforcements.
Panel damage must be examined carefully to select the most suitable repair method.
(A) In the figure is the plastic deformed area and the surrounding portions are elastic deformed areas.
Correction of (A) will automatically ...
Diagnosis Procedure
CHECK DOOR LOCK ACTUATOR
Check door lock actuator (driver side).
Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
REPLACE BCM
Replace BCM. Refer to Removal and Installation.
Confirm the operation after replac ...
Exploded View
REMOVAL
Front blower unit assembly Front heater & cooling unit assembly Steering member Drain hose : Always replace after every disassembly. : Indicates that the part is connected at points with same symbol in actual vehicle.
DISASSEMBLY
Heater pipe support Front expansion valve Cool ...