NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Location of Plastic Parts

Nissan Armada 2025-2026 Service and Repair Manual / Body Exterior, Doors, Roof & Vehicle Security / Body Repair / Location of Plastic Parts

Precautions for Plastics

Abbreviation Material name Heat resisting temperature °C (°F)

Resistance to gasoline and

solvents 		Other cautions
PE Polyethylene 60 (140) Gasoline and most solvents are harmless if applied for a very short time (wipe out quickly). Flammable
ABS Acrylonitrile Butadiene Styrene 80 (176) Avoid gasoline and solvents. —
AES Acrylonitrile Ethylene Styrene 80 (176) ↑ —
EPM/EPDM Ethylene Propylene (Diene) copolymer 80 (176) Gasoline and most solvents are harmless if applied for a very short time (wipe out quickly). Flammable
PS Polystyrene 80 (176) Avoid solvents. Flammable
PVC Poly Vinyl Chloride 80 (176) Gasoline and most solvents are harmless if applied for a very short time (wipe out quickly). Poisonous gas is emitted when burned.
TPO Thermoplastic Olefine 80 (176) ↑ Flammable
AAS Acrylonitrile Acrylic Styrene 85 (185) Avoid gasoline and solvents. —
PMMA Poly Methyl Methacrylate 85 (185) ↑ —
EVAC Ethylene Vinyl Acetate 90 (194) ↑ —
PP Polypropylene 90 (194) Gasoline and most solvents are harmless if applied for a very short time (wipe out quickly). Flammable, avoid battery acid.
PUR Polyurethane 90 (194) Avoid gasoline and solvents. —
UP Unsaturated Polyester 90 (194) ↑ Flammable
ASA Acrylonitrile Styrene Acrylate 100 (212) ↑ Flammable
PPE Poly Phenylene Ether 110 (230) ↑ —
TPU Thermoplastic Urethane 110 (230) ↑ —
PBT+ PC Poly Butylene Terephthalate + Polycarbonate 120 (248) ↑ Flammable
PC Polycarbonate 120 (248) ↑ —
POM Poly Oxymethylene 120 (248) ↑ Avoid battery acid.
PA Polyamide 140 (284) ↑ Avoid immersing in water.
PBT Poly Butylene Terephthalate 140 (284) ↑ —
PAR Polyarylate 180 (356) ↑ —
PET Polyethylene terephthalate 180 (356) ↑ —
PEI Polyetherimide 200 (392) ↑ —

CAUTION:

  • When repairing and painting a portion of the body adjacent to plastic parts, consider their characteristics (influence of heat and solvent) and remove them if necessary or take suitable measures to protect them.

  • Plastic parts should be repaired and painted using methods suiting the materials, characteristics.

Location of Plastic Parts

EXTERIOR

FOR PRO-4X GRADE

Component Material Component Material
Door mirror cover ABS Rear spoiler Upper PC + ABS
Door mirror finisher ABS Lower ASA
Door mirror housing assembly ABS Roof antenna Without ProPILOT Assist 2.1 models Inner cover PC + ABS
Door mirror base cover ABS Pad EPDM
Door mirror base gasket PE Antenna cover ASA, PC / ABS
Door mirror base assembly ABS With ProPILOT Assist 2.1 models Inner cover PC + ASA
Side turn signal lamp Lens PMMA Pad TPE
Housing ABS Mold base PBT
Inner lens PMMA Antenna cover PC + ABS
With roof rail models Roof rail PC + PET Rear side spoiler ABS
Roof rail cover PC + ABS Side window glass molding Stainless
Without roof rail models Roof side molding Molding Stainless + PVC Side window glass finisher AES
End cap PC + ASA Fuel filler lid PPE, PA
Front pillar finisher PC, ABS Fuel filler base assembly PP + Glass fiber
Front fender duct Base ABS Front and rear door outside molding Molding Stainless + TPO
Molding ABS End cap PBT
Front combination lamp Lens PC Front and rear door outside handle Cover PC + PET
Housing PP Body PP + Glassfiber
Inner lens PC Escutcheon cover PP + Glassfiber
Inner Panel PC Front gasket PP
Front grille Grille ABS Rear gasket TPO
Molding ABS Front and rear door outside handle bracket PA + Glassfiber
Front bumper finisher PP + EPM Rear bumper fascia PP + EPM
Front bumper fascia PP + EPM Rear bumper finisher upper PP + EPM
License plate bracket PP + EPM Rear bumper finisher lower PP
Front bumper side finisher ABS Rear bumper molding PP + EPM
Front fog lamp Lens PC Rear combination lamp Lens PMMA
Housing PC + PBT Housing ASA
Inner lens PMMA Inner lens PMMA
Fender protector PP Rear combination lamp cover ASA
Front fillet molding (If equipped) PP + EPM Back door finisher upper Outer ABS
Side step Cover PP + EPM Inner ASA
Reinforcement Aluminum Rear reflex reflector Lens PMMA
Rear fillet molding front (If equipped) PP + EPM Housing PC + ABS
Rear fillet molding rear (If equipped) PP + EPM License plate lamp Lens PMMA
Rear wheelhouse protector PET + PP Housing ABS + PC
High-mounted stop lamp Lens PMMA Back door finisher Outer ABS
Housing ABS Inner ASA

EXCEPT FOR PRO-4X GRADE

Component Material Component Material
Door mirror cover ABS Roof antenna Without ProPILOT Assist 2.1 models Inner cover PC + ABS
Door mirror finisher ABS Pad EPDM
Door mirror housing assembly ABS Antenna cover ASA, PC / ABS
Door mirror base cover ABS With ProPILOT Assist 2.1 models Inner cover PC + ASA
Door mirror base gasket PE Pad TPE
Door mirror base assembly ABS Mold base PBT
Side turn signal lamp Lens PMMA Antenna cover PC + ABS
Housing ABS Rear side spoiler ABS
Inner lens PMMA Side window glass molding Stainless
With roof rail models Roof rail PC + PET Side window glass finisher AES
Roof rail cover PC + ABS Fuel filler lid PPE, PA
Without roof rail models Roof side molding Molding Stainless + PVC Fuel filler base assembly PP + Glass fiber
End cap PC + ASA Front and rear door outside molding Molding Stainless + TPO
Front pillar finisher PC, ABS End cap PBT
Front fender duct Base ABS Front and rear door outside handle Cover PC + PET
Molding ABS Body PP + Glassfiber
Front combination lamp Lens PC Escutcheon cover PP + Glassfiber
Housing PP Front gasket PP
Inner lens PC Rear gasket TPO
Inner Panel PC Front and rear door outside handle bracket PA + Glassfiber
Front grille Grille ABS Rear bumper fascia PP + EPM
Molding ABS Rear bumper finisher upper PP + EPM
Front bumper grille PP + EPM Rear bumper finisher lower PP
Front bumper side grille Grille PP + EPM Rear bumper molding PP + EPM
Molding ABS Rear combination lamp Lens PMMA
Front bumper fascia PP + EPM Housing ASA
License plate bracket PP + EPM Inner lens PMMA
Front bumper side finisher ABS Rear combination lamp cover ASA
Front fog lamp Lens PC Tail lamp Lens PMMA
Housing PC, ABS Housing ASA
Inner lens PC Inner lens PMMA
Fender protector PP Rear reflex reflector Lens PMMA
Side step Cover PP + EPM Housing PC + ABS
Reinforcement Aluminum License plate lamp Lens PMMA
Rear wheelhouse protector PET + PP Housing ABS + PC
High-mounted stop lamp Lens PMMA Back door finisher Outer ABS
Housing ABS Inner ASA
Rear spoiler Upper PC + ABS — — —
Lower ASA

INTERIOR

Component Material Component Material
Luggage room lamp Lens PC Instrument pad A Core PC + ABS
Housing PA + Glassfiber Skin PVC
Inner lens PC Switch bracket PC + ABS
Back pillar garnish PP Instrument pad B Core PC + ABS
Luggage side lower finisher Base PP Skin PVC
Pad PP + PET Instrument lower panel LH PC + ABS
Rear pillar finisher Core PP Center instrument lower panel Core PC + ABS
Skin PET, PUR Skin PVC
Center pillar upper garnish Core PP Instrument pad D Core PC + ABS
Skin PET, PUR Skin PVC
Center pillar lower garnish PP Glove box assembly Inner lid PC + ABS
Map lamp assembly Console PP Outer lid PC + ABS
Lid PC + ASA Skin PVC
Lens PC Body PC + ABS
Cover PP Instrument lower cover PP
Map lamp bracket PC + ABS Front center console switch finisher assembly Molding PC + ABS
Front pillar garnish Core PP Center ventilator Case ABS
Skin PET, PUR Louver ABS, PBT + PET + Glassfiber
Dash side finisher PP Knob POM
Front speaker grille PP + EPM Escutcheon ABS
Display unit cover PP + EPM A/C finisher PC
Instrument panel assembly Core PP + Glassfiber Front center console bracket PP + Glassfiber
Skin PVC Instrument lower cover LH & RH PP
Instrument mask PP Front center console side finisher upper Core PC + ABS
Display unit finisher LH PC + ABS Skin PVC
Display unit finisher RH PC + ABS Front center console side finisher lower PP + EPM
Cluster lid A PP Front center console cup holder assembly Finisher PC + ABS
Steering column cover upper & lower PP + EPM Base PC + ABS
Instrument finisher A Finisher PC + ABS Tray PA + Glassfiber
Side ventilator Case ABS Cup holder PP
Louver ABS, PBT + PET + Glassfiber Console pocket PP
Knob POM Sub tray ABS
Escutcheon ABS Front center console body assembly Body PP + Glassfiber
Instrument finisher B Finisher PC + ABS Panel PP + EPM
Side ventilator Case ABS Lid skin PVC
Louver ABS, PBT + PET + Glassfiber Lid pad PUR
Knob POM Lid core ABS
Escutcheon ABS Front center console rear finisher assembly Upper PC + ABS
Instrument finisher C PP + EPM Lower PP + EPM

    Other materials

    Luggage Floor Board
    Removal and Installation REMOVALCAUTION: When removing, always use a remover tool that is made of plastic to prevent damage to the parts.Luggage Floor Rear Board Remove luggage floor box. Refer to Removal and Installation. Remove belt bracket mounting bolt of luggage floor rear board, and then remo ...

    Back Door Auto Closure Control Unit
    Description Back door does not opened using back door opener switch. Diagnosis Procedure CHECK DTC WITH BACK DOOR AUTO CLOSURE CONTROL UNIT Check that DTC is not detected with back door auto closure control unit. Is the inspection result normal? YES>> GO TO 2. NO>> Refer to DTC Index. ...

    Reservoir Tank Cap
    Inspection Check valve seat of reservoir tank cap. : Metal plunger Check if valve seat is swollen to the extent that the edge of the metal plunger cannot be seen when watching it vertically from the top. Check if valve seat has no soil and damage. Pull negative-pressure valve to ...