Exploded View
 |
Roof rear garnish |  |
Luggage room lamp | ||
 |
: Pawl | ||||
| : vehicle front | |||||
Removal and Installation
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
REMOVAL
CAUTION:
When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
Apply protective tape (A) on roof rear garnish to protect it from damage.
| : vehicle front |
Disengage luggage room lamp fixing pawl using a remover tool (A), and then pull out luggage room lamp from roof rear garnish.
|
: Pawl |
| : vehicle front |
Disconnect harness connector, and then remove luggage room lamp.
INSTALLATION
Install in the reverse order of removal.
Replacement
CAUTION:
-
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
-
Replacement of bulb is not possible due to the adoption of LED. When replacement, replace luggage room lamp as a single part. Refer to Removal and Installation.
Other materials
Rear Wheel Hub and Housing
Inspection
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
MOUNTING INSPECTIONC ...
Fusible Link Inspection
How To Check
With ProPILOT ASSIST 2.1A melted fusible link can be detected by visual inspection. If its condition is questionable, use circuit tester or test lamp.
Fusible link
CAUTION:
If fusible link should melt, it is possible that critical circuit (power supply ...
Diagnosis and Repair Workflow
Work Flow
OVERALL SEQUENCEDETAILED FLOWOBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain as much information as possible about the conditions and environment under which the malfunction occurred.
>>
GO TO 2.
CHECK SYMPTOM
Check the symptom based on the information obtained ...