Exploded View

![]() |
Vanity mirror lamp bracket | ![]() |
Headlining assembly | ![]() |
Vanity mirror lamp |
![]() |
: Pawl | ||||
| : vehicle front | |||||
Removal and Installation
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
REMOVAL
Remove headlining assembly. Refer to Removal and Installation.
Disconnect harness connector.
Disengage vanity mirror lamp bracket fixing pawl using a remover tool (A) according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove vanity mirror lamp and vanity mirror lamp bracket.

![]() |
: Pawl |
INSTALLATION
Install in the reverse order of removal.
Replacement
CAUTION:
-
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
-
Replacement of bulb is not possible due to the adoption of LED. When replacement, replace vanity mirror lamp as a single part. Refer to Removal and Installation.
Other materials
Brake assist
Brake assist
The Brake Assist system in the Nissan Armada is designed to enhance braking performance
during emergency situations. When the system detects that the driver is applying
the brake pedal with significant force, it automatically increases braking pressure
beyond what a conventional ...
Fuel Filler Lid
Removal and Installation
REMOVAL Fully open fuel filler base assembly.
Disengage fuel filler lid fixing pawl using a removal tool (A), and then remove fuel filler lid according to numerical order 1→2 indicated by arrows as shown in figure.
: Pawl
INSTALLATION Note the following items, and ...
Console
Removal and Installation
REMOVALRemove front center console bracket. Refer to Removal and Installation.
Disconnect inside key antenna (console) harness connector.
Remove inside key antenna (console) fixing TORX bolts , and then remove inside key antenna (console) .
INSTALLATIONInstall in the revers ...



