Description
This describes how to erase the mixture ratio self-learning value. For the actual procedure, follow the instructions in “Diagnosis Procedure”. (For details, refer to Work Procedure .)
Work Procedure
START
With CONSULT
-
Start engine and warm it up to normal operating temperature.
-
On CONSULT screen, select “ECM”>>“Work support”>>“Air fuel ratio learning value clear”.
-
Clear mixture ratio self-learning value by touching “CLEAR”.
With GST
-
Start engine and warm it up to normal operating temperature.
-
Ignition switch OFF.
-
Disconnect mass air flow sensor (bank 1) harness connector.
-
Restart engine and let it idle for at least 5 seconds.
-
Stop engine and reconnect mass air flow sensor (bank 1) harness connector.
-
Select Service $03 with GST. Make sure DTC P0102 is detected.
-
Select Service $04 with GST to erase the DTC P0102.
>>
END
Other materials
Conventional (fixed speed) cruise control
Basic information
The Nissan Armada offers a Conventional (fixed speed) cruise control mode as
a practical alternative to the advanced Intelligent Cruise Control system. This
mode is ideal for steady highway driving when adaptive distance control is not required
and allows the Nissan Armada t ...
System operation
The Nissan Armada sonar system provides both visual and audible alerts under
the following conditions:
Detection of front obstacles when the transmission is in D (Drive)
Detection of both front and rear obstacles when the transmission is in R
(Reverse)
How the system alerts of obstacle ...
Passenger Side
Description
Passenger door does not lock/unlock using door lock and unlock switch.
Diagnosis Procedure
CHECK DOOR LOCK ACTUATOR
Check door lock actuator (passenger side).
Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctio ...