Description
Moonroof and sunshade does not operate normally.
-
Moonroof Tilt UP/DOWN, OPEN/CLOSE or sunshade OPEN/CLOSE does not operate.
-
Moonroof Tilt UP/DOWN, OPEN/CLOSE or sunshade OPEN/CLOSE operation is slow.
-
Judder occurs during OPEN/CLOSE operation of moonroof and sunshade.
Diagnosis Procedure
CHECK GLASS LID
Check the following items.
-
Cracks, damage, or deformation of weather-strip.
-
Sticking of weather-strip.
-
Loose or missing glass lid mounting bolt.
-
Misalignment of glass lid. Refer to Adjustment.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK MOONROOF UNIT ASSEMBLY
Check the following items.
-
Damage, deformation or trapped foreign material of slide rail.
-
Insufficient application of grease to sliding section of slide rail. Refer to Removal and Installation.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK SUNSHADE
Check sunshade for damage, deformation, of interference with other parts.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace the malfunctioning parts.
CHECK BCM POWER SUPPLY AND GROUND CIRCUIT
Check BCM power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 5.
NO>>Repair or replace the malfunctioning parts.
CHECK MOONROOF MOTOR ASSEMBLY POWER SUPPLY AND GROUND CIRCUIT
Check moonroof motor assembly power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 6.
NO>>Repair or replace the malfunctioning parts.
CHECK SUNSHADE MOTOR ASSEMBLY POWER SUPPLY AND GROUND CIRCUIT
Check sunshade motor assembly power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 7.
NO>>Repair or replace the malfunctioning parts.
CHECK LIN COMMUNICATION CIRCUIT
Check LIN communication circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 8.
NO>>Repair or replace the malfunctioning parts.
CHECK COMMUNICATION SIGNAL CIRCUIT
Check communication signal circuit. Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 9.
NO>>Repair or replace the malfunctioning parts.
CHECK MOONROOF SWITCH AND SUNSHADE SWITCH
Check moonroof switch and sunshade switch.
-
Moonroof switch: Refer to Component Function Check.
-
Sunshade switch: Refer to Component Function Check.
Is the inspection result normal?
YES>>Check intermittent incident. Refer to Intermittent Incident.
NO>>Repair or replace the malfunctioning parts.
Other materials
Input Oil Seal
Exploded View
Transfer assembly
Input oil seal
: vehicle front
: Always replace after every disassembly.
: Apply transfer fluid.
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and ...
Intelligent Key
Description
Automatic back door open/close function does not operate using Intelligent Key.
Diagnosis Procedure
CHECK REMOTE KEYLESS ENTRY FUNCTION
Check remote keyless entry function.
Does door lock/unlock with Intelligent Key button?
YES>>
GO TO 2.
NO>>
Refer to Diagnosis Procedure.
...
Front Pillar Finisher
Exploded View
Grommet
Front pillar finisher
Double-sided tape
[t: 2.5 mm (0.098 in)]
: Clip
: Always replace after every disassembly.
Removal and Installation
REMOVALFully open front door.
Apply a protective tape (A) on the parts to protect it from damage.
...