NVH Troubleshooting ChartDiagnosis Procedure
CHECK LIFTING MECHANISM
Check for the following.
Mechanism deformation or pinched foreign materials.
Interference with other parts because of poor installation.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK LIFTING SWITCH
Check ...
Work Procedure
Work Procedure (Before Replacing Electric Throttle Control Actuator)
CHECK DTC
Perform DTC P0101 confirmation procedure. Refer to DTC Description.
Is the DTC P0101 displayed?
YES>>
GO TO 2.
NO>>
Replace electric throttle control actuator. Refer to Removal and Installation.
After replac ...
Work Procedure
FUEL PRESSURE RELEASE
FUEL PRESSURE RELEASE
Remove fuel pump fuse.
NOTE:
For the fuse number, Refer to Wiring Diagram.
For the fuse arrangement.
Start engine.
After engine stalls, crank it two or three times to release all fuel pressure.
Ignition switch OFF.
Reinstall fuel pump fuse after servicing ...