Because of modified sine wave output, the AC 120V outlet may not operate normally for electric appliance of which electric power consumption is 150W or less.
Electric appliances requiring a large amount of electric power consumption at startup (e.g., CRT-based TV, power tool)
Measuring instruments for data requiring accuracy (e.g., medical equipment, measuring instrument)
Microprocessor-controlled appliances (e.g., microprocessor-controlled blanket)
Noise may be caused in radio or TV, depending on an electric appliance.
Diagnosis ProcedureRemoval and Installation
CAUTION:
REMOVAL
Remove driver knee air bag module mounting bolts, and then move driver knee air bag module to secure workspace. Refer to Removal and Installation.
Disconnect harness connector.
Remove fixing clip , and then remove front foot lamp bracket (LH).
Disengage front foot lamp (LH) fixing ...
Removal and Installation
REMOVAL
Fully open hood assembly.
Remove fixing clips .
Remove fixing clips .
Disengage front grille fixing clips to secure workspace, and then remove front grille upper .
: Clip
Disengage fixing clips and pawls, and then remove front grille.
: Clip : Pawl
Remove the following parts ...
Exploded View
ABS actuator and electric unit (control unit) Bracket ABS actuator and electric unit (control unit) harness connector To electrical brake control unit primary side To electrical brake control unit secondary side To front RH caliper To front LH caliper To rear RH caliper To rear LH caliper ...