Diagnosis Procedure
CHECK STOP LAMP INPUT/OUTPUT SIGNAL CIRCUIT
Check stop lamp input/output signal circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Replace trailer brake control unit. Refer to Removal and Installation.
NO>>Repair or replace the malfunctioning parts.
Other materials
Radiator
Inspection
Check radiator for mud or clogging. If necessary, clean radiator as per the following:
Be careful not to bend or damage radiator fins.
When radiator is cleaned without removal, remove all surrounding parts such as radiator cooling fan assembly and horns. Then tape harness and connector ...
Automatic Back Door Warning Buzzer
Removal and Installation
REMOVALRemove rear bumper fascia. Refer to Removal and Installation.
Disconnect automatic back door warning buzzer harness connector.
Remove automatic back door warning buzzer mounting nuts , and then remove automatic back door warning buzzer .
INSTALLATIONInstall in the re ...
Door Outside Molding
Exploded View
Front door panel
Front door outside molding
Rear door outside molding
Rear door panel
: Pawl
: vehicle front
...