Diagnosis Procedure
CHECK SYMPTOM
Check symptom (A or B)
| Symptom | |
|---|---|
| A | Display does not turn ON |
| B | Display is normal |
Which symptom is detected?
A>>GO TO 2.
B>>GO TO 3.
CHECK POWER SUPPLY AND GROUND CIRCUIT
Check power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Replace trailer brake control unit. Refer to Removal and Installation.
NO>>Repair or replace the malfunctioning parts.
CHECK TRAILER BRAKE OUTPUT SIGNAL CIRCUIT
Check trailer brake output signal circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace the malfunctioning parts.
CHECK INTERMITTENT INCIDENT
Refer to Intermittent Incident.
>>
INSPECTION END
Other materials
Brake Caliper Assembly
Exploded View
REMOVAL
Brake caliper assembly
: N·m (kg-m, ft-lb)
DISASSEMBLY
Cap
Bleeder valve
Cylinder body
Sliding pin
Sliding pin boot
Bushing
Torque member
: vehicle front
: ...
Condenser Inlet Pipe
Removal and Installation
REMOVALCAUTION:
Perform lubricant return operation before each refrigeration system disassembly. However, if a large amount of refrigerant or lubricant leak is detected, never perform lubricant return operation. Refer to Perform Lubricant Return Operation.
When disconnec ...
Tilt & Telescopic
Diagnosis Procedure
CHECK STEERING COLUMN CONTROL MODULE POWER SUPPLY AND GROUND CIRCUIT
Check steering column control module power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
...