SUSPECTED PARTS (Possible cause) | Symptom | Reference | |
|---|---|---|---|
| Transfer fluid leakage | Noise | ||
| TRANSFER FLUID (Level low) | 1 | Inspection | |
| TRANSFER FLUID (Wrong) | 4 | 2 | |
| TRANSFER FLUID (Level too high) | 1 | ||
| LIQUID GASKET (Damaged) | 2 | Exploded View | |
| OIL SEAL (Worn or damaged) | 2 | Front oil seal: Exploded View Rear oil seal: Exploded View Input oil seal: Exploded View | |
| GEAR (Worn or damaged) | 3 | — | |
| BEARING (Worn or damaged) | 3 | — | |
| TRANSFER CASE (Damaged) | 3 | 3 | — |
NOTE:
When transfer inner parts are malfunction, replace transfer assembly.
Inspection Procedure
INSTRUMENT PANEL
Most incidents are caused by contact and movement between:
Cluster lid A and instrument panel
Acrylic lens and combination meter housing
Instrument panel to front pillar garnish
Instrument panel to windshield
Instrument panel mounting pins
Wiring harnesses behind the combination met ...
Removal and Installation
REMOVAL
Apply protective tapes (A) on the part to protect it from damage.
Disengage fixing pawls and peel off double-sided tapes using a remover tool (A), and then remove front fender duct .
: Pawl
Remove double-sided tape with a double-sided tapes remover from front fender duct and front fen ...
Precaution for Brake System
WARNING:
Brake fluid use refer to Fluids and Lubricants.
Never reuse drained brake fluid.
Always confirm the specified tightening torque when installing the brake pipes.
After pressing the brake pedal more deeply or harder than normal driving, such as air bleeding, check each item of brake pedal. Ad ...