Nissan Armada 2025-2026 Service and Repair Manual: Power Supply, Ground & Circuit Elements — Basic Inspection

Wiring Diagram

Lithium Ion Battery 12v Inspection

Other materials:

Work Procedure
WRITING VEHICLE SPECIFICATION With CONSULT Ignition switch ON. Perform writing vehicle specification to BCM following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual. NOTE: Log in the network according to CONSULT guidance. >> WORK END ...

Diagnosis Procedure
CHECK SYMPTOM Check the symptoms. A stop/start indicator lamp turned on, and did an engine perform a stall at the time of restart from a stop/start system? YES>> GO TO 2. NO>> Refer to Symptom Table. CHECK STOP/START PROHIBIT CAUSE With CONSULT Select “Stop/Star engine stall cause d ...

Inspection
CRANKSHAFT END PLAY Measure the clearance between thrust bearings and crankshaft arm when crankshaft is moved fully forward or backward with a dial indicator. Standard and limit : Refer to CylinderBlock. If the measured value exceeds the limit, replace thrust bearings, and measure again. If it s ...