Work Procedure
CHECK CAMERA LENS AND WINDSHIELD
Are camera lens and windshield contaminated with foreign materials?
YES (When the camera lens is contaminated with foreign materials.)>>Replace front camera unit 【Refer to Removal and Installation (Without ProPILOT Assist 2.1) or Removal and Installation (With ProPILOT Assist 2.1).】 and GO TO 2.
YES (When the windshield is contaminated with foreign materials.)>>Clean windshield.
NO>>GO TO 2.
CHECK FRONT CAMERA UNIT INSTALLATION CONDITION
Check front camera unit installation condition (installation position, properly tightened, a bent bracket).
Is it properly installed?
YES>>GO TO 3.
NO>>Install front camera unit properly, and perform camera aiming.
CHECK vehicle HEIGHT
Check vehicle height. Refer to Wheel Height.
Is vehicle height appropriate?
YES>>INSPECTION END
NO>>Repair vehicle to appropriate height.
Other materials
Water Outlet and Water Piping
Exploded View
Water hose 1
Clamp
Water hose 2
Water pipe 1
Water hose 3
Electric water pump
Bracket
Clip
Water hose 4
Drain plug
O-ring
Connector
Clip
Water hose 5
Water pipe 2
Gasket
Water hose 6
Water hose 7
Water pipe assembly
...
Second Seat Belt Retractor
Removal and Installation
WARNING:
Before servicing, disconnect ground line of battery. Refer to Precautions for Removing Battery Terminal.
Prevent accidental activation. Refer to Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER".
REMOVALSeat Belt Pre-ten ...
Second Seat Cushion
Disassembly and Assembly
DISASSEMBLYRemove seatback trim and pad. Refer to Disassembly and Assembly.
Disengage seat cushion trim fixing retainers .
Disengage seat cushion trim fixing retainers .
Disengage harness fixing clip of seat cushion, and then disconnect harness connector.
CAUTION:
Before ...