Never disassemble the chassis control module.
The parts must not be reused if they are dropped.
Never perform "Active Test" while driving the vehicle.
When the intelligent trace control function is activated, the driver may feel some vibration on the brake pedal, hear operating sounds, or feel the deceleration. This is not a malfunction, as it is caused by the normal operation of the intelligent trace control function.
When the intelligent trace control function is activated, engine sound becomes loud or the tachometer needle fluctuates. This is not a malfunction because it is caused by intelligent trace control function that is normally operated.
The intelligent trace control function is not always activated in all driving conditions.
Precautions for Harness Repair
Wiring DiagramInspection of Welded Portion
Spot welded portions can be checked by the destructive inspections explained below. They can be easily adopted when welding. Before and after welding, you should perform these destructive inspections to check the strength of the welded portions.
The welding spots should be equally spaced and arrange ...
Exploded View
Valve lifter (EXH) Valve collet (EXH) Valve spring retainer (EXH) Valve oil seal (EXH) Valve spring (EXH) Valve spring seat (EXH) Valve guide (EXH) Spark plug tube Valve lifter (INT) Valve collet (INT) Valve spring retainer (INT) Valve oil seal (INT) Valve spring (INT) Valve spring se ...
System temporarily unavailable
When any of the following messages appear on the vehicle information display,
a chime will sound and the I-BSI system will be turned off automatically.
"Unavailable Slippery Road": When the VDC system (except traction control
system function) or ABS operates.
"Currently Una ...