
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the driver side door opened.
Get out of the vehicle and close the driver side door.
Wait at least 3 minutes.
CAUTION:
Remove 12V battery terminal.
CAUTION:
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
Wiring DiagramInspection Procedure
INSTRUMENT PANEL
Most incidents are caused by contact and movement between:
Cluster lid A and instrument panel
Acrylic lens and combination meter housing
Instrument panel to front pillar garnish
Instrument panel to windshield
Instrument panel mounting pins
Wiring harnesses behind the combination met ...
TIRE PRESSURE SENSOR : Removal & Installation
WARNING:
REMOVAL
Remove tire assembly. Refer to ROAD WHEEL TIRE : Removal & Installation.
Remove valve cap, valve core and then deflate tire.
NOTE:
If the tire is reused, apply a matching mark to the position of the tire road wheel valve hole for the purpose of wheel balance adjustment after in ...
Active sound enhancement
NOTE:
To ensure the active sound enhancement system in the Nissan Armada operates
at its best performance, follow these important guidelines:
Do not block or cover the speakers, as this may distort or reduce sound
quality.
Avoid modifying or replacing the original speaker components inst ...