Chevrolet Sonic manuals

Nissan Armada 2025-2026 Service and Repair Manual: Inspection Procedure

INSTRUMENT PANEL

Most incidents are caused by contact and movement between:

  1. Cluster lid A and instrument panel

  2. Acrylic lens and combination meter housing

  3. Instrument panel to front pillar garnish

  4. Instrument panel to windshield

  5. Instrument panel mounting pins

  6. Wiring harnesses behind the combination meter

  7. A/C defroster duct and duct joint

CAUTION:

CENTER CONSOLE

Components to pay attention to include:

  1. Shifter assembly cover to finisher

  2. A/C control unit and cluster lid C

  3. Wiring harnesses behind audio and A/C control unit

DOORS

Pay attention to the:

  1. Finisher and inner panel making a slapping noise

  2. Inside handle escutcheon to door finisher

  3. Wiring harnesses tapping

  4. Door striker out of alignment causing a popping noise on starts and stops

TRUNK

In addition look for:

  1. Trunk lid dumpers out of adjustment

  2. Trunk lid striker out of adjustment

  3. Trunk lid torsion bars knocking together

  4. A loose license plate or bracket

MOONROOF/HEADLINING

  1. Moonroof lid, rail, linkage or seals making a rattle or light knocking noise

  2. Sunvisor shaft shaking in the holder

  3. Front or rear windshield touching headlining and squeaking

SEATS

Cause of seat noise include:

  1. Headrest rods and holder

  2. A squeak between the seat pad cushion and frame

  3. Rear seatback lock and bracket

UNDERHOOD

Causes of transmitted underhood noise include:

  1. Any component mounted to the engine wall

  2. Components that pass through the engine wall

  3. Engine wall mounts and connectors

  4. Loose radiator mounting pins

  5. Hood bumpers out of adjustment

  6. Hood striker out of adjustment

Work Flow
CUSTOMER INTERVIEW Interview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diagnostic Worksheet during the interview to document the facts and condit ...

Diagnostic Worksheet
...

Other materials:

Removal and Installation
CAUTION: Always work with 2 workers, because it is heavy weight. REMOVAL Remove headrest. Slide second seat to front most position. Disengage fixing pawls using a remover tool (A) according to numerical order 1→3 indicated by arrows as shown in the figure, and then remove center rail finisher (LH ...

Fuel
Use unleaded premium gasoline with an octane rating of at least 91 AKI (Anti Knock Index) number (Research octane number 96). NISSAN recommends the use of unleaded premium gasoline with 93 AKI number (Research octane number 98) to obtain the maximum vehicle performance and the best driveability in h ...

Motion-activated liftgate
Example Example Basic information The Nissan Armada features a convenient motion-activated liftgate system that allows hands-free operation using a simple foot gesture beneath the rear bumper. The kick motion sensor a is positioned on the left side under the rear bumper. When you per ...

© 2014-2026 Copyright www.niarmada.com
 
0.0061