Unit: N·m (kg-m, in-lb)
| Item | Standard |
|---|---|
| Pinion bearing (P1) | 1.08 – 1.66 (0.11 – 0.16, 10 – 14) |
| Side bearing (P2) | 0.588 – 1.078 (0.06 – 0.10, 6 – 9) |
Side bearing to pinion bearing (Total preload) (Total preload = P1 + P2) | 1.668 – 2.738 (0.17 – 0.27, 15 – 24) |
General Specifications
Drive Gear RunoutPrecautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Inner Sill
WARNING:
Work after lower side dash assembly, center pillar, outer sill, and inner center pillar are removed.
Unit: mm (in) : Vehicle front : Drill φ7 mm (0.28 in) hole for the plug welding hole (ultra high strength steel). : Drill φ8 mm (0.31 in) hole for the plug welding hole (ultra high stren ...
Normal Operating Condition
Symptom Result Brake pedal slightly vibrates and operation sound (motor sound and sound from suspension) occurs when VDC function, TCS function, ABS function, EBD function, brake limited slip differential (BLSD) function, brake assist function, hill start assist function, or advanced hill descent ...