Special Service ToolsPrecautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Removal and Installation
REMOVAL
Remove rear bumper fascia assembly. Refer to Removal and Installation.
Remove rear reflex reflector fixing screws .
Disengage rear reflex reflector fixing pawls, and then remove rear reflex reflector.
: Pawl
INSTALLATION
Install in the reverse order of removal. ...
FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL PUMP ASSEMBLY : Removal & Installation
WARNING:
WARNING:
Be sure to read “General Precautions” when working on the fuel system. Refer to GENERAL PRECAUTION : Precautions.
REMOVAL
Check fuel level on a level ground. If the fuel level is 7/8 of the fuel tank (full or nearly full), draw appropriate amount of fuel from the fuel tank.
...