Nissan Armada 2025-2026 Service and Repair Manual: Precautions for Removing Battery Terminal
NOTE:- NOTE:
- NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the driver side door opened.
Get out of the vehicle and close the driver side door.
BR08DE : 4 minutes R9N engine : 12 minutes BR10DE : 12 minutes V9X engine : 4 minutes D4D engine : 20 minutes YD25DDTi : 2 minutes HR09DET : 12 minutes YS23DDT : 4 minutes HR10DDT : 12 minutes YS23DDTT : 4 minutes HR10DET : 12 minutes ZD30DDTi : 60 seconds HR13DDT : 12 minutes ZD30DDTT : 60 seconds HRA2DDT : 12 minutes K9K engine : 4 minutes M9R engine : 4 minutes R9M engine : 4 minutes CAUTION:
Remove 12V battery terminal.
CAUTION:
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
WARNING:
Always observe the following items for preventing accidental activation.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
Always observe the following items for preve ...
Other materials:
Diagnosis Procedure
CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
With CONSULT
Start the engine.
CAUTION:
The vehicle must be in a stopped state.
Connect booster battery (12V) and jumper cable to 12V battery cable.
Select “Active test” in “ENGINE”.
Select “Auto stop start” in “Active test”.
Touch ...
Work Procedure
CAUTION:
Always use CONSULT for the decel G sensor calibration and side G sensor calibration. (It cannot be adjusted other than with CONSULT.)
CHECK THE VEHICLE STATUS
Steer the steering wheel to the straight-ahead position. Stop the vehicle on level surface.
Stop the engine.
Ignition switch OFF (A ...
Exploded View
O-ring Rear companion flange Rear oil seal Transfer assembly : N·m (kg-m, ft-lb) : Always replace after every disassembly. : Apply transfer fluid. ...
0.0055