While working, suitable work clothes, a work cap and safety shoes must be worn. To prevent burns, a long sleeve shirt and trousers must also be worn and must not be taken off under any circumstances.
Use welding respirator

Keep work clothes clean. Do not keep a lighter or other flammable materials in pockets.
During oxygen and acetylene gas welding, to protect eyes wear goggles according to the quantity of infrared rays.
During arc welding, to protect eyes wear a safety goggles with a shading plate according to the quantity of ultraviolet rays.
Gloves, apron, foot covers, earplugs and arm covers should be used to prevent burns.
Precautions for Operation
Safety SectionRemoval and Installation
REMOVAL
Remove rear bumper fascia. Refer to Removal and Installation.
Remove bracket cover fixing screws, and then remove bracket cover.
Disconnect hands free sensor harness connectors.
Remove hands free control unit fixing screws, and then remove hands free control unit.
Remove hands free sensor up ...
Diagnosis Procedure
NOTE:
CHECK REFRIGERANT CYCLE PRESSURE
Connect recovery/recycling recharging equipment to the vehicle and perform pressure inspection with gauge. Refer to Symptom Table.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace parts depending on the inspection results.
CH ...
Diagnosis Procedure
CHECK 12V BATTERY
Check 12V battery. Refer to Work Flow.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK AIR BAG FUSE
Check 10 A fuse [No. 5, located in fuse block (J/B)].
Is the inspection result normal?
YES>>
GO TO 3.
NO& ...