Diagnosis Procedure
Description
Check that vehicle is under the condition shown in “Conditions of vehicle� before starting diagnosis, and check each symptom.
NOTE:
Conditions of Vehicle (Operating Conditions)
One or more of Intelligent Keys with registered Intelligent Key ID is in the vehicle.
CHECK INTELLIGENT KEY SYSTEM (DOOR LOCK FUNCTION)
Operate door request switch and check that door lock/unlock operates.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Refer to Diagnosis Procedure.
CHECK SELF DIAGNOSTIC RESULT
-
Perform "Inside/outside antenna diagnosis" in "Work support" mode of "INTELLIGENT KEY" using CONSULT.
-
Check “Self Diagnostic Result� of “INTELLIGENT KEY� using CONSULT.
Is DTC detected?
YES>>Refer to DTC Index.
NO>>GO TO 3.
CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch. Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace malfunctioning parts.
REPLACE INTELLIGENT KEY UNIT
-
Replace Intelligent Key unit. Refer to Removal and Installation.
-
Confirm the operation again.
Is the inspection result normal?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident.
Other materials
Parking Brake Does Not Release
Description
When the electric parking brake cannot be released by the parking brake switch or automatically releasing, following procedure can be released.CAUTION:
Never reuse the parking brake actuator.
When replacing parking brake actuator, replace rear brake caliper assembly.
Diagnosis Proc ...
The Braking Force of Parking Brake Is Low
Description
The parking brake braking force is low and the vehicle moves backward when parked on an incline.
Diagnosis Procedure
REAPPLY THE PARKING BRAKE (1)
Pull the parking brake switch, and apply the parking brake.
Pull the parking brake switch 2 seconds ore mode.
Is the vehicle moving ba ...
Repairing High Strength Steel
High Strength Steel (HSS) and Ultra High Strength Steel (UHSS)
High strength steel and ultra high strength steel are used for body panels in order to reduce vehicle weight.Accordingly, precautions in repairing automotive bodies made of high strength steel are described below:UNDERBODY COMPONENT PART ...