Nissan Armada 2025-2026 Service and Repair Manual: RADIATOR : Inspection (Removal & Installation)
INSPECTION AFTER INSTALLATION
Check for leakage of engine coolant using the radiator cap tester adapter (commercial service tool) and the radiator cap tester (commercial service tool). Refer to ENGINE COOLANT : Inspection.
Start and warm up the engine. Visually check that there is no leakage of engine coolant.
RADIATOR : Removal & Installation
WARNING:
REMOVAL
WARNING:
Never remove radiator cap and reservoir tank cap when engine is hot. Serious burns could occur from high-pressure engine coolant escaping from engine cooling system. Wrap a t ...
Water Pump
...
Other materials:
Work Procedure
VIN Registration is an operation to register the VIN in ADAS control unit.
CHECK VIN
Check VIN of vehicle and note it. For VIN stamped position, refer to Information About Identification or Model Code .
>>
GO TO 2 .
PERFORM VIN REGISTRATION
With CONSULT
Ignition switch ON.
CAUTION:
Never s ...
Work Procedure
CHOOSE METHOD
There are two ways of learning method.
Which method do you choose?
With CONSULT>>
GO TO 2.
Without CONSULT>>
GO TO 3.
WITH CONSULT
With CONSULT
Ignition switch ON.
Perform "Steering column position learning” in "Work support" mode of "STEERING COLUMN” using CONSULT.
...
Work Flow
DETAILS OF TROUBLE DIAGNOSIS FLOWCHART
COLLECT THE INFORMATION FROM THE CUSTOMER
It is also important to clarify customer concerns before starting the inspection. First of all, perform an interview utilizing Diagnostic Work Sheet and reproduce the symptom as well as fully understand it. Depending on ...
0.0069