Removal and Installation
REMOVAL
Remove rear A/C unit assembly. Refer to Removal and Installation.
Disconnect rear air mix door motor harness connector 
.
Remove fixing screws , and then remove rear air mix door motor.
INSTALLATION
Install in the reverse order of removal.
Other materials
Idle Air Volume Learning
Description
Idle Air Volume Learning is a function of ECM to learn the idle air volume that keeps engine idle speed within the specific range. It must be performed under the following conditions:
Each time electric throttle control actuator or ECM is replaced.
Idle speed or ignition timing is out ...
Front Automatic Air Conditioning System
Work Procedure
DESCRIPTIONThe purpose of the operation inspection is to check that the individual system operates normally. Check condition
: Engine running at normal operating temperature.
OPERATION INSPECTION (DISPLAY UNIT)CHECK MEMORY FUNCTION
Touch AUTO switch to activate air conditioning ...
Glove Box Lamp
Exploded View
Glove box lamp is integrated structure with glove box assembly. For exploded view of instrument panel assembly, refer to Exploded View.
Replacement
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leak ...