- Ventilation System
- Precautions
- Duct and Grille
- Blower Unit
- Front Blower Motor
- In-Cabin Microfilter
- Rear Blower Motor
- Ventilation System Service Data and Specifications
- Heater & Air Conditioning System
- Precautions
- Heater & Air Conditioning System Tools and Preparation
- Diagnosis and Repair Workflow
- Refrigerant
- Lubricant
- Performance Test
- Refrigeration System Symptoms
- Noise
- A/c Compressor
- Cooler Pipe and Hose
- Condenser
- Front Heater & Cooling Unit Assembly
- Rear A/c Unit Assembly
- Heater & Air Conditioning System Service Data and Specifications
- Heater & Air Conditioning Control System
- Precautions
- Heater & Air Conditioning Control System Tools and Preparation
- Diagnosis and Repair Work Flow
- Operation Inspection
- Additional Service When Replacing A/c Auto Amp.
- Configuration (a/c Auto Amp.)
- Front Automatic Air Conditioning System
- Rear Automatic Air Conditioning System
- Insufficient Cooling
- Insufficient Heating
- Compressor Does Not Operate
- Multi Function Switch
- Rear A/c Control
- A/c Auto Amp.
- In-Vehicle Sensor
- Sunload Sensor
- Intake Sensor
- Exhaust Gas/outside Odor Detecting Sensor
- Ir Sensor
- Light & Rain Sensor
- Refrigerant Pressure Sensor
- Door Motor
- Electric Water Pump
Other materials
Door Mirror Cover
Removal and Installation
REMOVALRemove glass mirror. Refer to Removal and Installation.
Apply protective tapes (A) on the part to protect it from damage.
Disengage door mirror cover fixing pawls from door mirror housing assembly .
: Pawl
Remove door mirror cover.INSTALLATIONNote the follow ...
Front Wiper Drive Assembly
Removal and Installation
REMOVALRemove cowl top cover. Refer to Removal and Installation.
Remove front wiper drive assembly mounting bolts .
Disconnect front wiper drive assembly harness connector and remove harness clip, and then remove front wiper drive assembly.
CAUTION:
Never drop front wiper ...
Configuration (bcm)
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the BCM.The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification ...