Exploded View
Refer to Exploded View.
Removal and Installation
REMOVAL
Drain engine coolant from cooling system. Refer to ENGINE COOLANT : Draining.
Disconnect electric water pump harness connector 
.
Disengage fixing clip, and then move electric water pump harness to secure work space.
 |
: Clip |
Loosen clamps 
, and then disconnect water hose 3 
and water hose 4 
from electric water pump.
Remove mounting bolts , and then remove electric water pump assembly.
Disengage fixing clips , and then remove bracket from electric water pump.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
Securely insert each hose, and install clamp at a position where it does not interfere with the pipe bulge.
NOTE:
When filling radiator with engine coolant. Refer to ENGINE COOLANT : Refilling.
Other materials
Transfer: Atx93b Tools and Preparation
Preparation
Commercial Service Tools
Tool name Description
Drift
a: 61.0 mm (2.402 in) dia.
b: 56.3 mm (2.217 in) dia.
Installing front oil seal
Drift
a: 66.3 mm (2.610 in) dia.
b: 61.9 mm (2.437 in) dia.
Installing rear oil seal
Drift
a: 68.6 mm (2.701 in) dia.
b: 58.0 mm (2.28 ...
Intelligent Key System Symptoms
Diagnosis Procedure
NOTE:
Perform the self-diagnosis with CONSULT before the symptom diagnosis. Perform the trouble diagnosis if any DTC is detected.SYMPTOM TABLE 1 (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS) No. Door lock operation (remote keyless entry) Door lock operation (request switch of ...
Puddle Lamp
Exploded View
Puddle lamp is integrated structure with door mirror assembly. For exploded view of door mirror, refer to Exploded View.
Removal and Installation
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage ...