Lubricant or/and SealantCondition of the Panel
Before beginning, thoroughly check the panel and make any necessary corrections.
(1) CLEARANCE BETWEEN WELDING SURFACES
Gaps between the surfaces to be welded cause poor current flow. Even if welding could be done without removing such gaps, the welded area would be smaller, resulting in poor streng ...
Removal and Installation
REMOVAL
Seat Belt Retractor (LH and RH)
Remove third seat assembly. Refer to Removal and Installation.
Remove anchor plate mounting anchor bolt .
Remove shoulder anchor.Remove back pillar garnish. Refer to Removal and Installation. Remove shoulder anchor mounting anchor bolt , and then remove shou ...
ELECTRIC INTAKE VALVE TIMING CONTROL MODULE : Removal & Installation
REMOVAL
Remove air cleaner body. Refer to Removal and Installation.
Remove harness clip to bracket.
Disconnect electric intake valve timing control module harness connector. HARNESS CONNECTOR (LEVER LOCKING TYPE) in Refer to Harness Connector.
Remove electric intake valve timing control module mount ...