Nissan Armada 2025-2026 Service and Repair Manual: ELECTRIC INTAKE VALVE TIMING CONTROL MODULE : Removal & Installation
REMOVAL
Remove air cleaner body. Refer to Removal and Installation.
Remove harness clip to bracket.
Disconnect electric intake valve timing control module harness connector. HARNESS CONNECTOR (LEVER LOCKING TYPE) in Refer to Harness Connector.
Remove electric intake valve timing control module mounting nuts ( 
) and remove electric intake valve timing control module 
from the bracket.
Remove bracket mounting nuts ( ) and remove the bracket â‘ .
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Perform ELECTRIC IVT CONTROL ACTUATOR POSITION LEARNING. Refer to Work Procedure.
ELECTRIC INTAKE VALVE TIMING CONTROL MODULE : Exploded View
Bracket Electric intake valve timing control module : Vehicle front : N·m (kg-m, in-lb) ...
Other materials:
Inspection
WARNING:
FLUID LEAKAGE
FLUID LEVEL
CAUTION:
Never start engine while checking fluid level.
Install filler plug on transfer and then tighten to the specified torque.
CAUTION:
Never reuse filler plug.
Specified torque : 37.5 N·m (3.8 kg-m, 28 ft-lb) ...
Exploded View
REMOVAL
Headrest Second seat assembly (RH seat) Outside seat leg cover Inside seat leg cover Second seat assembly (LH seat) : Pawl : N·m (kg-m, ft-lb)
DISASSEMBLY
LH Seat
Seatback lever unit cap Seatback lever unit Headrest holder (lock) Headrest holder (free) Seatback trim Seatba ...
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
INTERVIEW FOR MALFUNCTION
It is also important to clarify the customer concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.
NOTE:
The customers are not professionals. Never assume that “mayb ...
0.0057